Blog about farmhouse: Elkay Farmhouse Sink Installation

• follow all local plumbing and building codes. Elkay recommends that the sink cutout and mounting holes be cut by the countertop fabricator prior to installation.

Pin by Martha on Kitchen Ideas Copper farmhouse sinks

• metal edges may be sharp.

Elkay farmhouse sink installation. Install two lengths of 2×4’s front to back in the cabinet base. Sink can be installed with either a traditional flat front or with a decorative band feature at the top. Elkay recommends removing material 1/16 of an inch at a time until the top of the sink is flush with the top of the cabinet.

Installation instructions (diy) how to install (diy): Elkay undermount sinks should only be fastened to a solid surface countertop (i.e. Inspect sink for damage prior to beginning installation.

Remove the false drawer front and the upper bracing from the base cabinet. Sink has a limited lifetime warranty. Place the sink in the cabinet and trace onto the side walls of the cabinet to show what material must be removed.

Apply silicone caulk (not included) evenly all around the top of the sink flanges. Elkay recommends that the sink cutout and mounting holes be done by the countertop fabricator prior to installation. Place the sink in the cabinet and trace

Remove the false drawer front from the base cabinet. Follow all local plumbing and building codes. Fireclay sinks are heavy, please arrange for assistance to move or position.

Then with a measuring tape, measure the length and width of the space down to the last millimeter. This sink is gorgeous , and will fit my kitchen perfectly. They can be reached at phone:

We would love to help you get the most accurate information for the installation of your new elkay crosstown stainless steel kitchen sink. Crosstown farmhouse sinks 1333 butterﬁeld road, suite 200 | downers grove, il 60515 | elkay.com ©2019 elkay manufacturing company (8/19) 1000005325.pdf • elkay recommends that undermount sinks be installed by a professional, experienced installer. Build out the support structure and ledge for your fireclay sink to rest on.

Measure the front apron of the sink and cut the face of the cabinet to allow the sink to slide in. Support the sink in place from the bottom. Thank you for your question!

The sink material is extended to the front panel of the sink, adding a stylish design element to your kitchen. My new sink is a single bowl farmhouse workstation sink made by elkay dart canyon. Elkay recommends removing material 1/16 of an inch at a time until the top of the sink is flush with the top of the cabinet.

Remove the false drawer front from the base cabinet. Fireclay sink is baked at more than 2,000° f for lasting durability that's stain and scratch resistant; Quartz farmhouse sinks 1333 butterﬁeld road, suite 200 | downers grove, il 60515 | elkay.com ©2019 elkay manufacturing company (11/19) 1000005326.pdf required tools (not included) installation remove the false drawer front and the upper bracing from the base cabinet.

Elkay is not responsible for the sink or countertop if damaged during installation. Even if you assume you have enough space to accommodate that large elkay farmhouse sink, you must take measurements. To do this, open up the doors to the cabinet that is beneath your current sink and clear out anything that might get in the way.

• elkay is not responsible for the sink or countertop if damaged during installation. For installation of this elkay farmhouse apron front fireclay kitchen sink you do not need any mounting hardware, but we do recommend using a professional installer to install your new sink. Sink is manufactured from 18 gauge 304 stainless steel with a polished satin finish, rear center drain placement, and full spray sides and bottom with sides and bottom pads.

Rated 5 out of 5 by stephh1980 from lovely farmhouse sink i am renovating my kitchen, so i am so happy about my new sink. Please contact our friendly customer care team for assistance. Elkay is not responsible for improper sink and/or countertop installations.

Required tools (not included) installation steps. We suggest this because the installer will need to construct a support frame. The sink is handcrafted from fine fireclay and has a smooth surface.

Place the sink in the cabinet and trace onto the side walls of the cabinet to show what material must be removed. Lower the countertop into place on the cabinets. Position and align the sink in the cabinet.

Elkay undermount sinks should only be fastened to a solid surface countertop (i.e. Install the sink support in the cabinet base. This farmhouse sink is installed beneath the countertop creating a seamless appearance where sink and countertop meet.

Stainless Farmhouse Sink, 357/8", Elkay Crosstown, 60/40